PTA Extra Heavy Duty L-Clamps are for the most demanding applications requiring the greatest clamping force.
Tempered, drop forged sliding arm reduces clamping set up time.
Nickel-chrome plated rails are heat formed from cold drawn profiled steel for maximum strength.
Replaceable spindles and pads available with specialized pads available for the Heavy Duty and Extra Heavy Duty models.
PTA Heavy Duty L-Clamps are perfect for more demanding applications.
Tempered, drop forged sliding arm reduces clamping set up time.
Nickel-chrome plated rails are heat formed from cold drawn profiled steel for maximum strength.
Replaceable spindles and pads available with specialized pads available for the Heavy Duty and Extra Heavy Duty models.
PTA long tapes feature rubber comfort grips, nylon coated steel blades and a 3 to 1 gear ratio for quick rewinding.
A plumb-bob or a plummet is a weight, usually with a pointed tip on the bottom, that is suspended from a string and used as a vertical reference line, or plumb-line. It is essentially the vertical equivalent of a “water level”.
The PTA plumb bob is manufactured from corrosion resistant, chrome plated steel with removable brass cap for easy and accurate string installation. Weight is 8 oz.
P/N: T5700
12″ heavy duty professional combination tri square with an etched stainless steel blade, built-in level vial and scriber.
P/N: T5500
Highly accurate, professional quality torpedo level.
9″ long with one magnetic side.
V-channel on opposite side for easy leveling of wall corners and pipe.
P/N: T5800
PTA impact sockets are manufactured from chrome molybdenum steel.
High torque design reduces corner rounding on your fasteners.
All sockets are 6 point.
Contains 13 deep sockets: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
P/N: T0102
Contains:
Solid Punches are ideal for loosening frozen or tight pins and keys prior to using a pin punch.
Pin Punches are ideal for driving out and removing already loosened pins and keys after initial movement by a solid or standing punch
Centre punches are used to mark the center of a point, usually used to mark the center of a hole when drilling holes.
Cold chisels are used for cutting, shaping or removing metals softer than the chisel itself such as wrought iron, unhardened steel, aluminum, brass and copper.
Warning: Always use punches and chisels on materials softer than the hardness of the punch itself.
Warning: Always wear safety goggles
P/N: T4996
Contains:
Solid Punches are ideal for loosening frozen or tight pins and keys prior to using a pin punch.
Pin Punches are ideal for driving out and removing already loosened pins and keys after initial movement by a solid or standing punch
Centre punches are used to mark the center of a point, usually used to mark the center of a hole when drilling holes.
Cold chisels are used for cutting, shaping or removing metals softer than the chisel itself such as wrought iron, unhardened steel, aluminum, brass and copper.
Warning: Always use punches and chisels on materials softer than the hardness of the punch itself.
Warning: Always wear safety goggles
P/N: T4992
Contains:
Ideal for driving out and removing already loosened pins and keys after initial movement by a solid or standing punch.
To prevent damage to a pin punch, use a solid punch to first loosen the pin.
Warning: Always use punches and chisels on materials softer than the hardness of the punch itself.
Warning: Always wear safety goggles
P/N: T4990
Ideal for aligning bolt or rivet holes prior to inserting a fastener between two or more pieces of metal.
The tapered end of a drift punch is placed into the semi-aligned bolt holes of two separate components, and then driven into the hole.
As it is driven in, the taper forces the two components into alignment, allowing for easy insertion of the fastener.
WARNING: Always wear safety goggles
A center punch is used to mark the center of a point.
It is usually used to mark the center of a hole when drilling holes.
Warning: Always use punches and chisels on materials softer than the hardness of the punch itself.
Warning: Always wear safety goggles