Ideal for aligning bolt or rivet holes prior to inserting a fastener between two or more pieces of metal.
The tapered end of a drift punch is placed into the semi-aligned bolt holes of two separate components, and then driven into the hole.
As it is driven in, the taper forces the two components into alignment, allowing for easy insertion of the fastener.
WARNING: Always wear safety goggles
| Cut | Shank | Length | P/N |
|---|---|---|---|
| 1/8" | 5/16" | 8" | T4891 |
| 3/16" | 1/2" | 10" | T4894 |
| 1/4" | 5/8" | 12" | T4896 |
Made of the highest grade carbon steel, accurately hardened and tempered preventing splintering and extending life
Edges accurately tempered to stay sharp
Working ends accurately ground and hardened to HRC 52-58 for maximum service
Striking end hardened to HRC-42 maximum – won’t chip or mushroom
Ideal for lining up holes in two or more pieces of metal and for drawing pins through various assemblies
Often referred to as aligning punches. Pry or twist both parts into alignment and then tap gently to ensure perfect alignment
WARNING: Always wear safety goggles
Working ends accurately ground and hardened to HRC 52-58
Striking end hardened to HRC-42 maximum