Toll free: 1800 661 6576

44 Mag Magnetic Drill

The 44 Mag Magnetic Drill portable drill press is the perfect machine for making holes in the shop or on the job site. With a powerful 10 Amp motor, the 44 Mag makes quick work of making holes. Rated for holes up to 1-3/8″.

Features a 3/4″ Weldon shank that fits Ultra-Kut™ annular cutters and other popular brands. Comes with 1/2″ drill chuck for use with twist drills up to 5/16″.

Gravity fed automatic center-feed lubrication system delivers cutting lubricant through the center pin directly to the cutting surface. This reduces friction and heat, lengthening the life of your cutter and increasing the speed of your cuts.

Backed by our 1 Year Limited Warranty, you can be sure that you are well looked after by PTA, with most mag drill service taking less than 2 days for turn around. The same can be said for routine maintenance. Contact your distributor or PTA for all warranty and service inquiries.

Drilling Tips

  • Annular cutters work best with constant, confident pressure. If the magnetic drill motor is noticeably struggling or the chips produced are blue in colour, ease off the pressure.
  • Titanium Series Annular Cutters are the ideal solution for cutting harder metals, like stainless steel.
  • Smaller diameter cutters use higher feed rates than larger cutters.
  • To increase the life of your cutter, use lubricating fluid or sticks.


  • Annular cutters are great for making new holes – but they are lousy at makes holes larger. Attempting to enlarge a hole is the primary cause of cutter breakage. To enlarge a hole, use a reamer or lathe.
  • 44 Mag Magnetic Drill
Hole Size Hole Depth Chuck Type P/N
7/16" - 1-3/8" 2" Weldon UA1440


Magnetic drill for use on ferrous steel
Rated for holes 7/16″ – 1-3/8″ x 2″
Fits Ultra-Kut™ Gold and Titanium Series annular cutters
Backed by 1 Year Limited Warranty


Hole making on ferrous steel


120V, 60Hz, 10A Motor
595 RPM free speed
2900 lbs, 1300 kg Magnetic Adhesion
18″H x 10-1/4″ L x 4-3/4″ W