A cold chisel is a tool made of tempered steel used for cutting ‘cold’ metals, meaning that they are not used in conjunction with heating torches, forges, etc.
Cold chisels are used for cutting, shaping or removing metals softer than the chisel itself such as wrought iron, unhardened steel, aluminum, brass and copper.
Used when a very smooth finish is not required or when the work cannot be done easily with other tools, such as a hacksaw, file, bench shears or power tools.
Warning: Always use punches and chisels on materials softer than the hardness of the punch itself.
Warning: Always wear safety goggles
| Cut | Shank | Length | P/N |
|---|---|---|---|
| 1/4" | 1/4" | 5" | T4800 |
| 5/16" | 1/4" | 5" | T4801 |
| 3/8" | 5/16" | 5-1/2" | T4802 |
| 7/16" | 3/8" | 6" | T4803 |
| 1/2" | 7/16" | 6" | T4804 |
| 5/8" | 1/2" | 6-1/2" | T4807 |
| 3/4" | 5/8" | 7" | T4810 |
| 7/8" | 3/4" | 7-1/2" | T4814 |
| 1" | 3/4" | 7-1/2" | T4817 |
Made of the highest grade carbon steel, accurately hardened and tempered preventing splintering and extending life
Edges accurately tempered to stay sharp
Working ends accurately ground and hardened to HRC 52-58 for maximum service
Striking end hardened to HRC-42 maximum – won’t chip or mushroom
Designed for cutting, shaping or removing metals softer than the chisel itself such as wrought iron, unhardened steel, aluminum, brass and copper.
Warning: Always use punches and chisels on materials softer than the hardness of the punch itself.
Warning: Always wear safety goggles
Working ends accurately ground and hardened to HRC 52-58
Striking end hardened to HRC-42 maximum