Green silicon carbide, vitrified bond bench grinding wheels
Silicon Carbide Bench Grinding Wheels
PTA green, vitrified bond silicon carbide bench grinding wheels offer consistent and quality performance for offhand deburring, shaping, metal removal and sharpening of non-ferrous and carbide parts and tools.
6-8″ wheels come complete with telescoping bushings down to 1/2″.
For 10″ wheels bushings are available here.
Grit guide: GC60 is coarse, GC80 is medium, GC100 is medium/fine, GC120 is fine
Grinding Tips:
- Bench and pedestal wheels must be dressed to prevent loading
- Use PTA Desmond Dressers
- Loading can cause excessive heat and damage the work piece or wheel
- Dressing exposes new cutting edges and provides chip clearance
| Dia. x Width x A.H. | Grit | Max. RPM | P/N |
|---|---|---|---|
| 6 x 3/4 x 1 | G60 Coarse | 4,136 | A1580 |
| 6 x 3/4 x 1 | G80 Medium | 4,136 | A1581 |
| 6 x 3/4 x 1 | G100 Medium/Fine | 4,136 | A1582 |
| 6 x 3/4 x 1 | G120 Fine | 4,136 | A1582 |
| 6 x 1 x 1 | G60 Coarse | 4,136 | A1584 |
| 6 x 1 x 1 | G80 Medium | 4,136 | A1585 |
| 6 x 1 x 1 | G100 Medium/Fine | 4,136 | A1586 |
| 6 x 1 x 1 | G120 Fine | 4,136 | A1587 |
| 7 x 1 x 1 | G60 Coarse | 3,600 | A1592 |
| 7 x 1 x 1 | G80 Medium | 3,600 | A1593 |
| 7 x 1 x 1 | G100 Medium/Fine | 3,600 | A1594 |
| 7 x 1 x 1 | G120 Fine | 3,600 | A1595 |
| 8 x 1 x 1 | G60 Coarse | 3,600 | A1600 |
| 8 x 1 x 1 | G80 Medium | 3,600 | A1601 |
| 8 x 1 x 1 | G100 Medium/Fine | 3,600 | A1602 |
| 8 x 1 x 1 | G120 Fine | 3,600 | A1603 |
| 10 x 1 x 1-1/4 | G60 Coarse | 2,483 | A1604 |
| 10 x 1 x 1-1/4 | G80 Medium | 2,483 | A1605 |
| 10 x 1 x 1-1/4 | G120 Fine | 2,483 | A1607 |
Bench and pedestal grinding
Metal removal, deburring, shaping, and sharpening of carbide or non-ferrous tools.
